In this ~22-minute video I explain how Emacs performs completion in a buffer. I cover what happens behind the scenes with the variable completion-at-point-functions. Then I also go to the frontends, which affects the modalities of interaction. I cover t built-in Completions buffer, the packages Corfu and Company, and the built-in completion-preview-mode. Finally, I comment at some further length on how to control the grouping of results in the completion-at-point-functions. In that context I also mention the Cape package, as well as some extra functionality that the Company package provide. I wrote an article which covers all of what is in the video as well as code samples. Its text is below.

Table of Contents

1. Make TAB complete when it can
2. The in-buffer completion backends (completion-at-point-functions)
   1. Common providers of CAPFs
3. The completion frontends
   1. Corfu for an in-buffer completion popup window
      1. My preferred corfu setup plus cape
   2. Company for an in-buffer completion popup window
      1. My preferred Company setup
   3. The built-in completion-preview-mode for a minimalist single suggestion at a time
      1. My preferred setup for completion-preview-mode

Make TAB complete when it can

By default, Emacs uses TAB to align the current line or selected region of text. It does so based on the relevant rules provided by the major mode (e.g. a programming mode may have specific requirements for how the body of a function definition is indented).

We can tell Emacs to also use TAB to perform completion once no further alignment is possible in the given context.

(setq tab-always-indent 'complete)

The in-buffer completion backends (completion-at-point-functions)

The completion-at-point-functions is a variable (technically an abnormal hook) that takes as its value a list of functions. We can call those “CAPFs”, for “completion at point functions”. Those are used to perform completion in the buffer, with the text right before the cursor as their input.

When we request completion for the text at point, either via TAB or the command completion-at-point (C-M-i by default), Emacs looks at the value of the completion-at-point-functions, and calls the functions found there in order from first to last (or left to right).

Normally, once a function returns results, Emacs will display those and will not move to the remaining functions in the completion-at-point-functions. So if we have many functions, we may not see of them at once. To do so we need more advanced solutions, which I comment on further below.

The completion-at-point-functions typically has a buffer-local value. This means that the functions we run in one buffer will likely be different than what we have in another buffer. For example, in a programming mode it makes sense to use the Language Server Protocol to get comprehensive suggestions for the language we are programming in, whereas in Org mode we may only wish to see the correct spelling of a word.

When the completion-at-point-functions has a buffer-local value, it will typically include a t. This is a reference to its corresponding global value. So if Emacs tries to complete and reaches the t, it then goes through the list with the global CAPFs.

Common providers of CAPFs

• specialised minor modes;
• the major mode;
• the Language Server Protocol via its Emacs client (e.g. eglot or lsp-mode);
• the cape package;
• the company package;
• other packages that may extend company or related.

The completion frontends

For a few years now Emacs has a unified infrastructure at its core for how completions are done. Users should not mess around with that. What they can do instead is choose how the completions are displayed as well as the relevant modalities for filtering and selecting candidates.

Corfu for an in-buffer completion popup window

A package by Daniel Mendler, the developer of vertico and consult, among others, which is built on top of the completion-at-point-functions. It is designed to be fast and effective, with a good out-of-the-box experience and reasonable extensions.

By default, corfu does not automatically pop up its window. Users must manually invoke completion or opt in to the auto-completing functionality.

;; Read the comprehensive documentation of Corfu for further customisation options.
(use-package corfu
  :ensure t
  :init
  (setq tab-always-indent 'complete)
  :config
  ;; ;; If you want the popup window to appear automatically as you type:
  ;;
  ;; (setq corfu-auto t)
  (global-corfu-mode 1))

My preferred corfu setup plus cape

This is just for your information. It fits my use-case, but I do not recommend it as a starting point. The cape package is also developed by Daniel Mendler.

(use-package corfu
  :ensure t
  :init
  (setq tab-always-indent 'complete)
  :config
  (setq corfu-preview-current nil)
  (setq corfu-min-width 20)

  (setq corfu-popupinfo-delay '(1.25 . 0.5))
  (corfu-popupinfo-mode 1) ; shows documentation after `corfu-popupinfo-delay'

  (global-corfu-mode 1)

  ;; I also have (setq tab-always-indent 'complete) for TAB to complete
  ;; when it does not need to perform an indentation change.
  (define-key corfu-map (kbd "<tab>") #'corfu-complete)

  ;; Sort by input history (no need to modify `corfu-sort-function').
  (with-eval-after-load 'savehist
    (corfu-history-mode 1)
    (add-to-list 'savehist-additional-variables 'corfu-history)))

(use-package cape
  :ensure t
  :after corfu
  :config
  ;; This is for the global value.
  (setq completion-at-point-functions '(cape-dabbrev cape-file))

  (defun prot/cape-super-set-local (capfs &optional individual-capfs)
    "Set `completion-at-point-functions' to current value plus CAPFS.
Treat CAPFS and the default value as a super CAPF.  Then append the
INDIVIDUAL-CAPFS to the list."
    (let* ((all-for-super (append completion-at-point-functions capfs))
           (all-minus-global (delq t all-for-super))
           (cape-super (apply #'cape-capf-super all-minus-global)))
      (setq-local completion-at-point-functions (append (list cape-super) individual-capfs (list t)))))

  (defun prot/cape-prog-setup ()
    "Set up Cape for programming."
    (prot/cape-super-set-local '(cape-dabbrev) '(cape-file)))

  (add-hook 'prog-mode-hook #'prot/cape-prog-setup)

  (defun prot/cape-text-setup ()
    "Set up Cape for prose."
    (prot/cape-super-set-local '(cape-dict cape-dabbrev cape-emoji) '(cape-file)))

  (add-hook 'text-mode-hook #'prot/cape-text-setup))

Company for an in-buffer completion popup window

This package by Dmitry Gutov is older than corfu though remains in active development and has all the features of Corfu plus some extras. Fundamentally though, it does the same thing, so if you are already using one there is no pressing need to switch to the other.

As of this writing (2026-07-19), company version 1.1.0 is still in development. It comes with many nice features, such as native support for tab-always-indent, child frames, and in-buffer completion in the minibuffer.

By default, and unlike corfu, Company automatically pops up its window. You can opt out if you wish to.

;; Remember to read the comprehensive documentation of Company for all
;; the customisation options and extra features.
(use-package company
  :ensure t
  :init
  (setq tab-always-indent 'complete)
  :config
  (global-company-mode 1))

My preferred Company setup

The company includes several CAPFs, unlike corfu which spins them out into the separate cape pacakge. Company CAPFs can easily be grouped to collect the results of many functions into a single popup window.

This is what I am currently using. Again, I am sharing it for your information and do not meant to imply that it is useful in general.

(use-package company
  :ensure t
  :init
  (setq tab-always-indent 'complete)
  :config
  ;; NOTE 2026-07-19 with the next version of Company, which may be
  ;; 1.1.0, (setq tab-always-indent 'complete) is supported
  ;; out-of-the-box, which means that we disable the automatic popup
  ;; feature and rely on TAB to perform completion in the buffer.
  (setq company-idle-delay nil)

  (setq company-tooltip-limit 6)
  (setq company-tooltip-minimum-width 25)
  (setq company-tooltip-align-annotations t)
  (setq company-dabbrev-code-completion-styles t) ; use the `completion-styles'

  (setq company-transformers '(company-sort-by-occurrence
                               company-sort-by-backend-importance
                               company-sort-prefer-same-case-prefix))

  (setq company-frontends '(company-childframe-unless-just-one-frontend
                            company-preview-if-just-one-frontend
                            company-echo-metadata-frontend))

  ;; Notice the `(company-capf company-dabbrev)', which represents a
  ;; grouping of CAPFs, whereas `company-files' shows results of its own.
  (setq company-backends '((company-capf company-dabbrev) company-files))

  ;; IGNORE THIS AS IT IS RELEVANT ONLY FOR MY CONFIGURATION which
  ;; does a lot with the `display-buffer-alist'.
  (define-advice company-show-doc-buffer (:around (&rest args) prot)
    (let ((help-window-select nil)
          (display-buffer-alist nil)
          (display-buffer-overriding-action
           '((display-buffer-reuse-mode-window display-buffer-below-selected)
             (window-height . 0.3)
             (post-command-select-window . nil))))
      (apply args)))

  (defun prot/company-prog-backends ()
    "Set `company-backends' locally to my preferred value for `prog-mode' and derivatives."
    (setq-local company-backends '((company-capf company-dabbrev-code) company-files)))

  (add-hook 'prog-mode-hook #'prot/company-prog-backends)

  (defun prot/company-text-backends ()
    "Set `company-backends' locally to my preferred value for `text-mode' and derivatives."
    (setq-local company-backends '((company-dabbrev company-ispell company-capf) company-files)))

  (add-hook 'text-mode-hook #'prot/company-text-backends)

  (global-company-mode 1))

(use-package company-statistics
    :ensure t
    :after company
    :config
    (company-statistics-mode 1))

The built-in completion-preview-mode for a minimalist single suggestion at a time

Since Emacs 30, there is the completion-preview-mode by Eshel Yaron. Unlike the other options, it displays only one suggestion at a time. It does it inline as you type. You can still cycle through suggestions or display more of them with either the default *Completions* buffer or one of the aforementioned packages.

Note that Company also has the equivalent of completion-preview-mode. Check the company-frontends for more.

completion-preview-mode does not provide its own CAPFs directly or through some companion package. You will have to use one of the previous options or simply rely on what other providers (major modes, LSP, …) give you.

;; Do M-x describe-package and then search for completion-preview to
;; read its commentary, or M-x find-library and then
;; completion-preview to go straight to its source code (where you can
;; read the commentary and browse through all the options).
(use-package completion-preview
  :ensure nil
  :config
  (global-completion-preview-mode 1))

My preferred setup for completion-preview-mode

And here is what I have for this minor mode. Again, it is only for your information.

(use-package completion-preview
  :ensure nil
  :demand t
  :bind
  ( :map completion-preview-active-mode-map
    ("M-n" . completion-preview-next-candidate)
    ("M-p" . completion-preview-prev-candidate)
    ("M-<return>" . completion-preview-insert)
    ;; This way you can combine it with another interface (like the
    ;; generic Completions buffer or `corfu-mode') to display more
    ;; candidates.
    ("<tab>" . completion-preview-complete))
  :config
  (setq completion-preview-exact-match-only nil)
  (setq completion-preview-commands '(self-insert-command
                                      insert-char
                                      analyze-text-conversion
                                      completion-preview-insert-word))
  (setq completion-preview-minimum-symbol-length 2)
  (setq completion-preview-idle-delay 0.3)
  (setq completion-preview-ignore-case t)
  (setq completion-preview-sort-function #'identity)

  (global-completion-preview-mode 1))

plus-circle Add Review

comment

Reviews